Goto Home Page    
   
   
   


Round Tanks
 Click to view full photograph
2500 litre polyethylene rainwater tank
  • Dimensions 1940mm total height x 1360mm diameter
  • Tank comes with leaf strainer, 90mm overflow and 1" bottom valve
  • All colour-bond colours available
Price    $649
 Click to view full photograph 4800 litre polyethylene rainwater tank
  • Dimensions 2100mm total height x 1760mm diameter
  • Tank comes with leaf strainer, 90mm overflow and 1" bottom valve
  • All colour-bond colours available
Price    $749
 Click to view full photograph 9000 litre polyethylene rainwater tank
  • Dimensions 2370mm total height x 2480mm diameter (inlet height - 2250mm)
  • Tank comes with leaf strainer, 90mm overflow and 11/4" bottom valve
  • All colour-bond colours available
Price    $1,495
 Click to view full photograph 14000 litre polyethylene rainwater tank
  • Dimensions 2380mm total height x 3010mm diameter (inlet height - 2250mm)
  • Tank comes with leaf strainer, 90mm overflow and 11/4" bottom valve
  • All colour-bond colours available
Price    $1,850
Slimline Tanks
 Click to view full photograph
1100 litre
  • Dimensions Length 1.38m x Height 1.77m x Width 640mm
  • Tanks come with leaf strainer, 90mm overflow and 1" bottom tap
  • All colour-bond colours available
Price    $750
 Click to view full photograph 3000 litre
  • Dimensions Length 2.5m x Height 2.1m x Width 760mm
  • Tank come with leaf strainer, 90mm overflow and 1" bottom tap
  • All colour-bond colours available
Price    $1495
Detention Tanks (available June 08)
1000 litre
  • Dimensions Length 1.15m x Height 1.88m x Width 580mm
These will be available in combinations to allow for retention and detention Larger tanks can be set up to allow for differing percentages of retention and detention. Bring your council requirements to us and we will set up a tank arrangement to comply with their regulations.
Tank Guarantee
All "Polytank Sales" manufactured tanks are covered by a 10 year repair or replace warranty covering manufacturing defects. Tanks will be repaired or replaced at Polytank's discretion.
Non "Polytank Sales" tanks are covered by the individual manufacturer's warranty which may vary from brand to brand.

Warranties will be voided if pumps are coupled to the tank via rigid pipe work; a flexible hose (available at Polytank) must be used. Overflow pipework must also be supported so that the weight is not being transferred back to the tank outlet. Contact Polytank Sales for further advice if required.
 Click to view larger Image  Click to view larger Image  Click to view larger Image
Tank and Plumbing Rebates
For SA Government information and downloadable rebate forms click here >

Site Preparation
To be eligible for our 10 year guarantee the tank site must meet certain minimum requirements.

Round tanks can be sited on concrete or pavers provided that the surface is flat and level with no obvious protrusions. A sand or dolomite base is also acceptable providing it is prepared appropriately.

The area should be clear of stones or any objects that may damage the base of the tank. We require 50mm - 75mm of material to be leveled and compacted preferably with a vibrating plate. The base should be a minimum of 150mm larger than the diameter of the tank. Care must be taken to avoid any water runoff or overflow that may tend to undermine the tank base.

Slimline tanks due to their less stable nature require a concrete or paver base.