Pumps
Poly tank recommend the purchase of a pump to go with your tank as it gives you the flow and pressure to use the water how you wish. It is our desire to give you a package
that will cause you to be totally happy with your purchase.
Premium Onga - JMM100 Garden pump
A perfect compliment to one of our quality tanks these pumps will allow you to use your rainwater in the same way as you currently use mains water. Ideal for washing the car,
running a sprinkler and general garden watering. It can also be used to operate a single point inside the house like a toilet or laundry tap. Comes complete with pressure switch
allowing auto switch on and off as you open and close your tap. Onga manufacture these pumps in Australia and have been a reliable supplier for 30 years, the pumps come with a 2 year warranty.
| Price if purchased with a tank |
$350 |
| Recommended retail price |
$460 |
Premium Onga - SMHP45 Household pump
This is the pump to run a small to medium household giving good flow and pressure necessary for an enjoyable shower. It has a stainless steel wet end for long life and corrosion protection,
auto start and stop plus low water protection devices. The pressure switch will control the pressure to around 140 kpa (20 psi) simulating mains pressure.
| Price if purchased with a tank |
$645 |
| Recommended retail price |
$790 |
Premium Onga - SMHW45 Household pump with water switch
This is the same pump as the SMHP45 except it comes with the water switch. This enables it to automatically determine whether rainwater or mains
is supplied to the house dependent on the water level in the tank. The switch will divert to mains in the event of a power failure and also incorporates
the required back-flow valves to prevent rainwater feeding into the mains system.
| Price if purchased with a tank |
$961 |
| Recommended retail price |
$1230 |
Onga manufacture these pumps in Australia and have been a reliable supplier of quality pumps for 30 years, the pumps come with a 2 year warranty.
Polytank can supply the full range of Onga products at very good prices.
Polytank also offer very good discounted prices on tank accessories like Leaf Eaters, Water Diverters and tank gauges.
Tank and Plumbing Rebates
For SA Government information and downloadable rebate forms click here >
Site Preparation
To be eligible for our 10 year guarantee the tank site must meet certain minimum requirements.
Round tanks can be sited on concrete or pavers provided that the surface is flat and level with no obvious protrusions. A sand or dolomite base is also
acceptable providing it is prepared appropriately.
The area should be clear of stones or any objects that may damage the base of the tank. We require 50mm - 75mm of material to be leveled and compacted
preferably with a vibrating plate. The base should be a minimum of 150mm larger than the diameter of the tank. Care must be taken to avoid any water
runoff or overflow that may tend to undermine the tank base.
Slimline tanks due to their less stable nature require a concrete or paver base.
|
Overview
